STARDIAG

Set up WiFi connection SDConnect “WORKSHOP” for Windows 8, 10. Windows 8 and Windows 10, unlike Windows 7, do not allow you to create a direct computer – to-computer (Road24) connection. However, it is possible to create an Ad-hoc “WORKSHOP”

SD Connect configuration Road24h . Setup and connection via LAN cable and Wi-Fi direct connection. Configuration Road24h mode for Windows XP. Configuration Road24h  mode for Windows 7. 1 . SD Connect configuration Road24h mode for Windows XP. 1.1. Make the configuration of

SD Connect configuration “Workshop” mode, through a router. As an example, was used router TP Link. Connection via router (mode Workshop) is more reliable and sustainable compared to a direct WiFi connection (Road24h). The following is an example of mode settings

Mercedes SD Connect C4. Install the batteries. When installing batteries follow the correct polarity according to the image:   It is recommended to operate the multiplexer SD Connect C4 with established internal batteries. Size AA Ni-Cd 1.2 V. the recommended

Mercedes diagnostic connector. The Pinout of the diagnostic  connectors. The Pinout of the diagnostic connector Mercedes 38 pin: (-) ground contact. (+) power pin 15 or circuit 87. (+) output power, circuit 30 contact K-line of the electronic control unit ECU(ECU)